RaceTrim Hi- Back Wide Suspension Seats

July 21st, 2009 admin No comments

RaceTrim Hi- Back Wide Suspension Seats

Features:

Fully welded and painted steel frame construction
Dense foam cushining
Weather-proof suspension bladder
Rigid suspension straps
Seat belt slots accept all latch style belts
Standard tab style mount points
Classic square stich style fabric

Dimensions:

Overall width 23 inch
Overall Heigth 31 inch
Shoulder width 21 inch
Mounting point side to side 16 inch
Mounting point front to back 18 inch

These seats will work great for a sandrail, dune buggy, pre-runner, baja bug,
rock crawler, golf cart, rhino, ranger and artic cat prowler.

The Corbeau GTA Lo Back is a more modern low back style seat

July 20th, 2009 admin No comments


The GTA Lo Back is a more modern low back style seat. For those who are looking for a low back seat but don’t necessarily want a vintage look, the GTA Lo Back is your seat. Corbeau is known for making the most comfortable seats in the world and we didn’t hold back on the GTA Lo Back. This seat was designed with a 65 degree angle back giving you a little more recline than most fixed back seats. As a rule of thumb, the GTA Lo Back seat will fit up to a 36-38 inch waist.
Read more…

Race Trim Seats Thin Style can work great when you lack room

July 19th, 2009 admin No comments


Race Trim Seats Thin Style

Features:

Fully welded and painted steel frame construction
Dense foam cushining
Weather-proof suspension bladder
Rigid suspension straps
Standard tab style mount points
Classic square stich style fabric

Dimensions:

Overall width 19 inch
Overall Heigth 25 inch
Shoulder width 18 inch

These seats will work great for a thin sandrail or dune buggy, manx, pre-runner, baja bug,
rock crawler, golf cart, rhino, ranger and artic cat prowler

Corbeau Rhino Seat Covers

July 17th, 2009 admin No comments


Corbeau Rhino Seat covers are a padded seat cover to go over your stock Rhino seats. The Rhino Seat Cover also comes with a padded headrest cover to go over the hard plastic headrest cover on your Rhino. Corbeau Rhino Seat covers will match our rear bench Rhino Seats and come in either all vinyl or a vinyl/cloth combination.
Read more…

RaceTrim Low Back Low Side Seats

July 15th, 2009 admin No comments


RaceTrim Low Back Low Side Seats

Features:

Fully welded and painted steel frame construction
Dense foam cushining
Weather-proof suspension bladder
Rigid suspension straps
Seat belt slots accept all latch style belts
Standard tab style mount points
Classic square stich style fabric

Dimensions:

Overall width 21 inch
Overall Heigth 25.5 inch
Shoulder width 19 inch

These seats will work great for a sandrail, dune buggy, pre-runner, baja bug,
rock crawler, golf cart, rhino, ranger and artic cat prowler.

Corbeau RXP Rhino Seats Comfort and Looks

July 13th, 2009 admin No comments

The RXP Yamaha® Rhino Seat is a direct bolt-in front replacement seat for your Yamaha® Rhino. The RXP Yamaha® Rhino Suspension Seat was designed for those who want the safety of suspension and the comfort of Corbeau. Get rid of those uncomfortable plastic seats and treat your back to the comfort of suspension. We integrated our state-of-the-art suspension technology with the comfort and design that Corbeau is known for, and from that came the RXP Yamaha® Rhino Seat.
Read more…

Empi RaceTrim Hi Backs With Removable Cushions

July 12th, 2009 admin No comments

This seat has all of the feature a stanard hi-back has and
Shoulder Loops
Dual shoulder belt slots
Removable lower seat cushion
Extra leg Padding Dimensions

Corbeau LG1 Reclining Seats are a consumer favorite

July 11th, 2009 admin No comments


The LG1 racing seat is a consumer favorite when it comes to comfort. The second you sit in this seat you will see why so many customers are ranting and raving about this seat. Its unique curves and contours re-define comfort. Whether on street, the track, or off-road, the LG1 racing seat will enhance your overall driving experience. As a rule of thumb, the LG1 will fit up to a 38-inch waist, while the LG1 Wide will fit up to a 42-inch waist. High wear patches are strategically placed to protect your seat from abuse in the high wear areas.
Read more…

Corbeau Seat Brackets, A breif Overview

July 11th, 2009 admin No comments

Corbeau has the largest inventory of custom seat brackets in the industry. One of the biggest mistakes people make when buying an aftermarket seat, is trusting the company when they say, “We have a universal bracket that will work with minor modifications.” If you haven’t learned yet, universal means is it doesn’t fit anything. In order for an aftermarket seat to fit in your vehicle, you must get a custom bracket! We receive hundreds of calls from customers who spent countless hours trying to install other seats and never could get it to work. Some were successful but either their seats sat way too high or the seat was sitting at an odd angle. At Corbeau we know and understand that when you buy a seat you want it to bolt right in your vehicle. We are the only company to stock brackets for almost every vehicle that was ever made. Just take a look at our bracket guide and you’ll see what we are talking about. In most cases you simply remove your stock seat and bracket and the Corbeau seat bracket will bolt right up to the existing holes in your floor pan. In some cases you might have to open the holes a little due to slight variations in floor pans. Corbeau seat brackets are powder coated and come with either single locking or double locking sliders. We can’t overstate how important it is to get custom brackets with your seats. Not only is it important for your safety but also for your sanity. Visit the Corbeau Master Bracket Guide to find the correct seat bracket for your vehicle.

Corbeau Baja RS Reclining Seats

July 10th, 2009 admin No comments


Corbeau Baja RS Reclining
The Corbeau Baja RS Reclining Off Road Suspension Seat was designed for the off road enthusiasts who still want the comfort of a daily driver and the safety of suspension. We integrated our state-of-the-art reclining technology with the Baja SS Off Road seat and from that came the Baja RS Reclining Off Road Seat.

Read more…

Corbeau Fixedback FX1 Race Seats

July 7th, 2009 admin No comments


The FX1 Pro racing seat features composite fiberglass technology. The FX1 Pro racing seat comes in three different sizes, the FX1 Pro, FX1, and FX1 Wide. The FX1 Pro combines comfort, performance, and safety at an absolutely unbeatable price. Designed with an emphasis on comfort, this seat is one of the most comfortable race seats you will ever sit in. If you enjoy racing and want a practical and affordable shell seat, the FX1 Pro is a hard one to pass on. As a rule of thumb, the FX1 Pro racing seat will fit up to a 36 inch waist, the FX1 will fit up to a 38 inch waist and the FX1 Wide (black only) will fit up to a 42 inch waist.
Read more…

RaceTrim Child Seats

July 6th, 2009 admin No comments


Empi Racetrim Child Seats
Fully welded and painted steel frame construction
Dense foam cushining
Weather-proof suspension bladder
Rigid suspension straps
seat belt slots accept all latch style belts
Standard tab style mount points
Classic square stich style fabric

Dimensions:

Overall width 15 inch
Overall Heigth 23 inch
Shoulder width 15.5 inch
Mounting point side to side 9.5 inch
Mounting point front to back 10.75 inch

These seats will work great for a sandrail, dune buggy, pre-runner, baja bug,
rock crawler, golf cart, rhino, ranger and artic cat prowler.

Corbeau Baja Low Back With Headrest

July 5th, 2009 admin No comments

The Baja Low Back seat is a low back version of our ever-popular Baja SS Suspension Seat. This line of suspension seats is one of the most advanced suspension seats available today.

Read more…

Empi Race Trim Bench Seats 42″& 48″

July 4th, 2009 admin No comments

These seat can go UPS, Please call for qoute.

The front of this seat has Grey Fabric and the Back is Grey Vinyl
Features:

Fully welded and painted steel frame construction
Dense foam cushining
Weather-proof suspension bladder
Rigid suspension straps
5 Point seat belt slots accept all latch style belts
Standard tab style mount points
Classic square stich style fabric

Dimensions:

Overall width 48 inch
Overall Heigth 25 inch
Shoulder width 46 inch
Mounting point side to side 41 inch
Mounting point front to back 14.75 inch

These seats will work great for a sandrail, dune buggy, pre-runner

RaceTrim Hi Back Seats are a Great value

July 4th, 2009 admin No comments


RaceTrim Hi Back Seats are a Great value

Features:

Fully welded and painted steel frame construction
Dense foam cushining
Weather-proof suspension bladder
Rigid suspension straps
Seat belt slots accept all latch style belts
Standard tab style mount points
Classic square stich style fabric

Dimensions:

Overall width 21 inch
Overall Heigth 31 inch
Shoulder width 19 inch
Mounting point side to side 14 inch
Mounting point front to back 18 inch

These seats will work great for a sandrail, dune buggy, pre-runner, baja bug,
rock crawler, golf cart, rhino, ranger and artic cat prowler.

Corbeau Forza Racing Seats

July 4th, 2009 admin No comments

The Forza is the perfect entry level racing seat. The Forza racing seat combines comfort, performance, and safety at an absolutely unbeatable price. If you enjoy racing and want a practical seat, the Forza is a hard one to pass on. The Forza is also ideal for tight space and minimal headroom applications.
Read more…

Corbeau Safari Jeep Rear Seats

July 4th, 2009 admin No comments

The Safari Jeep® Seat is a rear fold and tumble seat designed as a direct bolt-in to CJ and YJ Jeeps® and will match the Corbeau Moab front seats.  The Safari Jeep® Seat is available in matching stock Jeep® black, tan, spice, and charcoal fabrics. If your stock fold and tumble seat is worn out and you want to give your Jeep a new interior, the Safari is the perfect addition. If your budget doesn’t allow you to get new front seats, the Safari  will match your stock front Jeep® seats.
Read more…

Corbeau A4 Series Reclining Seats

July 3rd, 2009 admin No comments


The A4 is the perfect adjustable racing seat for tight spaces and minimal headroom applications. Whether on the street, the track, or off-road, the A4 racing seat will enhance your overall driving experience. As a rule of thumb, the A4 will fit up to a 34-36 inch waist while the A4 Wide will fit up to a 38-40 inch waist.
Read more…

Welcome to Seatsus.com’s Blog

July 3rd, 2009 admin No comments

Seatus.com carries Corbeau and Racetrim suspension seats that will dress up any type of vehicle from Jeeps, UTV’s Street cars and 4-Wheel drives.
Please browse our large selection.
Seatsus.com is part of Chirco Performance of Tucson